MITSUBISHI inverter FR-F740 series.
Voltage level: three phase 400V.
Frequency converter capacity: 280KW.
The main circuit of the inverter can be divided into two categories in general: voltage type is the voltage source of the DC converter for AC inverter,
The filtering of the DC circuit is the capacitance; the current mode is the DC conversion of the current source to the AC inverter,
The DC loop filter is the inductor FR-F740-S560K-CHT PDF FR-F740-S560K-CHT
Why is the frequency of the inverter voltage proportional to the change?
The electromagnetic torque of any motor is the result of the interaction between the current and the magnetic flux, the current is not allowed to exceed the rated value, otherwise it will cause the heating of the motor FR-F740-S560K-CHT PDF.
Therefore, if the magnetic flux decreases, the electromagnetic torque will decrease, which leads to the reduction of the load carrying capacity FR-F740-S560K-CHT Manual . Master station module.
DC5V consumption current: 150mA FR-F740-S560K-CHT PDF.
Data communication with various machines using Ethernet.
FX3 series through Ethernet expansion device,
The monitoring and maintenance of equipment can be easily carried out in a place far from the scene.
Various machine communication with MODBUS protocol
Special adapter for MODBUS communications,
FX3 series can be used as a master or slave station with a variety of MODBUS protocol machine communication MITSUBISHI Instruction manual.
High speed counter equipped with 6 to 8 channels.
FX series of all models are standard with a high-speed counter.
Through a simple procedure to achieve high speed control MITSUBISHI Instruction manual.
Through the CC-Link and a variety of machine communications, the province of wiring.
Using CC-Link to control a variety of FA machines.
FX3G (*) /FX3U (C) series can be expanded by CC-Link control points. Maximum frequency: 50kHz.
Input points: 1 points.
Output form: transistor 2 point output MITSUBISHI Instruction manual.
Weight: 0.13kg.
FX2NC-1HC can achiieve high speed counting by 1 phase /2 phase 50kHz hardware counter FR-F740-S560K-CHT Instruction manual.
Hardware comparator with high speed matching output function.
In the 2 phase count, can be set 1, 2, 4 frequency.
Can be achieved by PLC or external inputt to count the licensing / prohibition FR-F740-S560K-CHT Manual .
Can also be connected to the linear drive output type of the encoder.
FX2NC-1HC can only be connected to FX3UC.