LK Automation Limited LK Automation Limited
Information sort OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Supply
PFXGP4311HTADER Resolution (pixel) x:640 480 (VGA) Proface PFXGP4311HTADER Hand-held programmable touch screen


Analog /PNP output type.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
LCD:TFT.
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1.
USB (host):1.
USB (equipment):1.
Built in DIO input: 12 points.
Built in DIO output: 6 points PFXGP4311HTADER.
Built in AIO inpput: 4 points.
Built in AIO output: 2 points.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input.
Dedicated DIO:2 point pulse output, PWM output PFXGP4311HTADER.
Expansion module EX module: none.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design PFXGP4311HTADER.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture Proface PFXGP4311HTADER.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface.
Integrated design.
Adopt integrative design, compact structure,
When the installation is only required to open a hole in the panel 22mm Proface PFXGP4311HTADER.
The display module or the control module can be easily replaced when the fault is eliminated.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the display module is installed in other locations Proface PFXGP4311HTADER.
Display module occupies a small space, even if the space is limited, but also can be flexible to install. 5.7 inches, replace the backlight (1 / set)
Type: there is an emergency stop switch (red), no key switch.
Display type: TFT color LCD.
Display size: 5.7 inch.
Display color: 65536 color (no flicker), 16384 color (flashing).
Resolution (pixel) x:640 480 (VGA).
Memory: 32MB.
Data backup: 320KB SRAM.
Emergency stop switch provides 3 colors of red, yellow and grey.
3 position enable switch with forced contact disconnect function.
Key switch without pressing the emergency stop switch can also be mobile devices PFXGP4311HTADER.
Very light.
The high visibility of the configuration of the 65536 color TFT color LCD.
High definition and wide viewing angle to bring excellent visual effects.
Easily replace GP3000H series.

Related supply information