CV500-SL CPU Bus Unit for Com SYSMAC LINK Unit SYSMAC LINK Unit (coaxial) CV500-SLK21.CPU Unit: Units with 10 I/O points.
I/O terminal block.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: relay.
Internal clock: --.
Model: C200HW-ME08K.
Capacity: 8K words C200HW-ME08K.Name: Bit Slave Units with e-CON Connectors. Specifications: Inputs; 2 inputs; PNP.
Simple and Intelligent Bit Slaves,
with Industry-standard e-CON connectors.
Slave Units capable of 2-point bit-level distribution C200HW-ME08K.
The I/O power supply is supplied from the communications,
power in the previously connected flat cable, and has a,
short-circuit detection function for protection.
Industry-standard e-CON connectors.
Short-circuit protection safeguards the network,
from I/O short circuits C200HW-ME08K.
Simple communications connections,
with flat cable and connectors.
Bit-level distribution to support,
essentially any application. Number of outputs: 16 pts.
Max. switch-ing capacity: 50 mA at 4.5 V DC to 300 mA at 26 OMRON C200HW-ME08K.4 V.
External connector: Terminal block.
Weight: 210 g max.Model: Unit version 1.2.
NJ system: CPU Rack;Expansion Rack,
Not supported.
CJ1 system: CJ1 system, Expansion Backplane,
8 Units (per CPU Unit).
CP1H system: CP1H PLC, 2 Units.
NSJ system: Controller NSJ, Not supported;
Expansion Backplane, 8 Units OMRON C200HW-ME08K.
New Controller Link Units,
Now with 4,000 Send Words.
The Controller Link is an FA,
network that can send and receive,
large amounts of data easily,
and at high speed.
The Controller Link supports data,
links that enable sharing,
data between PLCs and computers,
and a message service that enables,
sending and receiving data whenever required OMRON C200HW-ME08K.
Systems can be flexibly built by using Repeater,
Units to enable T-branches, long-distance wiring,
and converting part of the network to optical cable. Product name: CJ-series I/O Control Unit.
Specifications: Mount one I/O Control Unit,
on the CPU Rack when connecting one or,
more Expansion Racks.
Connecting Cable: CS1W-CN@@3 Expansion,
Connecting Cable Connected Unit:
CJ1W-II101 I/O Interface Unit,
Mount to the right of the CPU Unit.
Current consumption: 5V , 0.02A;
24V, --.
Standards: UC1, N, L, CCE C200HW-ME08K.
Expand CJ/NJ-series with These Units.
To expand a CJ/NJ-series Controller,
connect an I/O Control Unit to the CPU Rack,
and I/O Interface Unit to the Expansion Rack,
and connect the two Units with I/O Expansion Cable.