Type: there is an emergency stop switch (red) and a key switch.
Display type: TFT color LCD.
Display size: 5.7 inch.
Display color: 65536 color (no flicker), 16384 color (flashing) PFXLM4301TADDK PDF.
Resolution (pixel) x:640 480 (VGA).
Memory: 32MB.
Data backup: 320KB SRAM.
Emergency stop switch provides 3 colors of red, yellow and grey.
3 position enable switch with forced contact disconnect function PFXLM4301TADDK
Key switch without pressing the emergency stop switch can also be mobile devices.
Very light.
The high visibility of the configuration of the 65536 color TFT color LCD.
High definition and wide viewing angle to bring excellent visual effects PFXLM4301TADDK PDF.
Easily replace GP3000H series.A veneer, for the GP4000 series back loading models of full flush (white, 1)10.4 inches (STN), the replacement of the host backlight (2 / set).Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceLT4000M (module type DIO), NPN output, DC24V (host) PFXLM4301TADDK PDF. Touch screen anti ultraviolet protective film (1 pieces).DIO model /PNP output type.
Display size: 3.5 inches.
Resolution: 320 x 240 pixels (QVGA).
LCD:TFT.
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1 Proface User's Manual.
USB (host):1.
USB (equipment):1.
Built in DIO input: 20 points.
Built in DIO output: 10 points.
Built in AIO input: No.
Built in AIO output: No.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input.
Dedicated DIO:2 point pulse output, PWM output.
Expansion module EX module: none Proface User's Manual.
Expansion module CANopen module: 63 stations.
Conntroller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps) PFXLM4301TADDK Manual.
Remote HMI Pro-face.
Natural connection production line and tablet PC or smart phone. By adding APP,
True implementation of mobile operations without loss of any operational performance Proface User's Manual.
Directly confirm the cause of the failure of the phone, as far as possible not to the scene on the recovery of the machine running.
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface.
Integrated design.
Adopt integrative design, compact structure,
When the installation is only required to open a hole in the panel 22mm. PFXLM4301TADDK User's Manual.
The display module or the control module can be easily replaced when the fault is eliminated.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the dissplay module is installed in other locations PFXLM4301TADDK Manual.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.