Protection for GP rear connectors (large and small for each of the 1).Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceA connector that connects the DIO interface for connecting an external I/O device (5 sets) CA8-CANLT-01 PDF. COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionFor RGB input USB cable to prevent disconnection (2 / set)For 5 CA8-CANLT-017 inch models, for fixing the hooks of the three EX modules.COM1 pin adapter, which is used to connect thhe communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface CA8-CANLT-01 PDF CA8-CANLT-01 Manual. 10.4 inches (TFT), the replacement of the host backlight (1).Suitable for A/B+ Type modelsCOM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)5 CA8-CANLT-01 PDF. 7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface User's Manual. 12.1 inches, replaced by a host of backlight (1).5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connector256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Profface User's Manual CA8-CANLT-01 User's Manual. Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationUse external output for the GP3000 series of auxiliary connectors (5 / sets) Proface User's Maanual CA8-CANLT-01 Manual. 1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.