Adapter for EX module (5 / set)Used to convert RGB to DVI-A7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2COM2 adapter for converting the COM2 interface to the RS-422 terminal block5 CA2-ISOALL422-01 PDF. 7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set) CA2-ISOALL422-0113 pin input connectors for HTB and 16 pin output connectors. (1 / set)Extension cable for connecting USB (Type-A) interface to front panel.Used to convert the USB interface to the serial interface (RS-232C) CA2-ISOALL422-01 PDF. A modem or bar code reader thatt can be connected to support RS-232C CA2-ISOALL422-01 Manual. 15 inches, replaced by a host of backlight (1).Extended cable for connecting USB (Type-A) (LT) interface.COM1 interface with the cable for direct connection to the CPU series PLC QMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine CA2-ISOALL422-01 PDF. 10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.Used in a variety of host and man-machine interface for RS-422 connectionGP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panel10 Proface User's Manual. 4 inches (TFT), the replacement of the host backlight (1).Touch panel operation for RGB input modules (Master - from: Mini-B)10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories Proface User's Manual. The main controller is connected to the man-machine interface for MPI communicationThe main controller is connected to the man-machine interface for MPI communicationSuitable for GLC2300 seeries12 CA2-ISOALL422-01 User's Manual. 1 inches, replaced by a host of backlight (1).128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface User's Manual. CCOM1 interface with the cable for direct connection to the CPU series PLC AUse external output for the GP3000 series of auxiliary connectors (5 / sets) CA2-ISOALL422-01 Manual.