Actuator: Short hinge roller lever.
Approved Standards: UL CSA EN.
Small, High-precision Enclosed Switch.
Small, High-precision Enclosed Switches with Built-in Basic,
Switches for High Repeatability and Durability of 10 Million,
Operations Minimum ZX-GTC41 PDF.
Same mounting pitch as Z Basic Switch.
Requires less operating force than conventional limit switches.
Lineup includes modes with operation indicators for easy,
maintenance and inspection ZX-GTC41
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for Information on approved models.). Optical system: diffuse type ZX-GTC41 PDF.
Detection distance: 350 positive and negative 135mm.
Beam shape: point beam.
Beam diameter: diameter of 240 M.
Resolution: 20 m.
Cable length: 2m. Optical system: Regular reflective.
Beam shape: Line beam.
Sensing distance: 30±2 mm.
Resolution: 0.25 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website ZX-GTC41 PDF. Power supply: DC.
Output type: NPN.
Stable, Easy & Affordable.
New Regular-reflective Sensor Head.
Designed for Optimal Wafer Measurement ZX-GTC41 Manual. Type: Standard.
Setting distance: 31 to 187 mm (variable).
Sensing area: 10 X 9 OMRON Introduction Manual. 2 mm to 50 X 46 mm (variable).
Degree of protection: IP65.
Simple to use.
Detection abilities close to human vision.
One-touch automatic setting for stable detection.
2.2-inch monitor integrated in compact housing.
Sensor Heads with field of view up to 150 mm. Power supply: DC.
Output type: PNP OMRON Introduction Manual.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at or whichever way it is inserted OMRON Introduction Manual.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area. Shape: Screw-shaped.
Dimensions: M18 x 46.3 mm.
Sensing distance: 7 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpieece Displacement ZX-GTC41 Introduction Manual.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).

Easily perform calculation for two Sensors by using a Calculating Unit ZX-GTC41 Manual.
Prevent mutual interference for up to five Units by using a Calculating Unit.