Applicable Sensor Head: ZX-LT1001/LT005.
Quantity: 1.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website ZW-XF02R PDF. Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 3.0A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC.
Ionization time: 1 s.
Ion balance: ±10V max.
Amount of ozone generated: 0 ZW-XF02R01 ppm,
(Measured at a distance of 50 mm from air outlet).
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red).
Main functions: Ion balance adjustment (Automatic and manual) ZW-XF02R PDF.
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max., load current: 100mA max.
Residual voltage: 1V mmax ZW-XF02R Manual.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0.1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing) ZW-XF02R PDF.
Ambient humidity range: 35% to 65% (No icing or dewing).
Weight (Packaged): Approx. 2 kg (Approx. 3 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten.
Accessories: Instruction sheet, I/O connector, Stand, Streamer.
This ionizer series is designed to go anywhere OMRON Communications User's Manual.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues. Item: Parallel cable for ZW-CE1@T 32-pole,
(included with Controller ZW-CE1@T).
Cable length: 2m.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects OMRON Communications User's Manual.
This principle is described below. Shape: Screw-shaped.
Dimensions: M10 x 22 mm.
Sensing distance: 2 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpiece Displacement.
Sensor Heads suppoort a wide variety of applications OMRON Communications User's Manual ZW-XF02R Communications User's Manual.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).

Easily perform calculation for two Sensors by using a Calculating Unit ZW-XF02R Manual.
Prevent mutual interference for up to five Units by using a Calculating Unit.