Actuator: Short hinge roller lever.
Type: Micro load.
Compact, General-purpose Horizontal.
Switches.
Models for Microloads Added to Series.
Approved by EN, UL, CSA, and CCC (Chinese standard) S8VM-15015 PDF.
(Ask your OMRON representative for information on approved models.),
Incorporates a switch with a durable coil spring in a tough,
high precision case.
Compact and uses a single basic switch for applications where,
strength is required S8VM-15015
Models for microloads and models with operation indicators,
added to series.
Terminal protective cover can be switched to wire cable from,
either the left or right S8VM-15015 PDF.
Sealing characteristics that meet IEC IP67 degree of protection. Configuration: Covered Power Supplies.
Input voltage: 100 to 240 VAC (free) (80 to 370 VDC *).
S8JX-G15005@@@:Switchable between 100 to 120 VAC and 200 to 240 VAC S8VM-15015 Manual.
(DC power cannot be input.).
Power ratings: 35 W.
Output voltage: 5 V S8VM-15015 PDF.
Output current: 7 A.
Built-in fan: No.
Easy-to-use, Widely range from 15 W to 600 W (Output Voltage: 5 V to 48 V).
Easy Mounting: Front-mounted type, DIN rail-mounted type are available.
Screw-mount at the top. (except 300-/600-W models).
Safety standards: UL 508/60950-1, cUL CSA C22.2 No OMRON Installation and Operating Manual. 107.1,
cUR CSA C22.2 No. 60950-1.
EN 50178 (= VDE 0160) Over voltage.
category III.
EN 60950-1 (= VDE 0805 Teil 1).
EMC: Conforms to EN 61204-3.
(EMI:EN55011 ClassA).
Input conditions: The input voltage range of 15-W, 35-W,
50-W, 100-W, and 150-W models has,
been increased to 80 to 370 VDC (EC Directives and safety standards do not apply OMRON Installation and Operating Manual. ).Communications: Supported (RS-232C).
UL Class 2 output: Not compliant.
Complete Flexible DC Circuit Protector That.
Has a Wide Array of Displays, Alarm,
Outputs, and Other Digital Functions.
Four circuit protectors in one package.
Simple ssetting of current tripping values for each branch outputs,
in 0 OMRON Installation and Operating Manual S8VM-15015 Installation and Operating Manual. 1-A units.
Startup and shutdown sequence control.
Display and alarm functions (Input voltage, output current,
run time, aand over-temperature),
Outputs conform to UL Class 2 (at 24 VDC, S8M-CP04-RS only),
DIN Rail mounting S8VM-15015 Manual.
RoHs-compliant.
Free Support Tool available.