Item: Advanced models; ATC function models.
Functions: ATC (Threshold value automatic correction).
Model: NPN output.
Advanced Fiber Amplifier Units E5CZ-Q2 PDF.
Features a Power Tuning function that optimizes light,
reception at the press of a button.
APC circuits to suppress LED aging degradation used with,
4-element LEDs.
2-channel models achieve the thinnest* profile in the industry,
at only 5 mm per channel E5CZ-Q2
2-channel models also offer AND/OR control output.
The E3X-MDA0 with two channels supports an EtherCAT Sensor.
Communications Unit or CompoNet Sensor Communications Unit. Sensing method: Through-beam type (with slot) E5CZ-Q2 PDF.
Sensing distance (slot width): 13 mm (slot width).
Output type: NPN output.
Outpu configuration: Light-ON.
A Wide Slot Width of 13 mm and.
Superior Resistance to Light.
Interference and Noise.
Noise resistance equivalent to photomicrosensors with built-in amplifiers E5CZ-Q2 PDF.
Resistance to common noise at least 30 times that of previous models.
Resistance to inverter noise at least 10 times that of previous models.
Reverse polarity protection built in. Appearance: Shielded, M12.
Sensing distance: 2 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement OMRON Communications Manual.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available. Appearance: T-shaped.
Sensing method: Through-beam type (with slot) OMRON Communications Manual.
Cable length: 2 m.
Sensiing distance: 5 mm (slot width) E5CZ-Q2 Manual.
configuration Output: Dark-ON.
Indicator mode: No incident light.
Model: NPN output.
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides OMRON Communications Manual.
Wide operating voltage range: 5 to 24 VDC. Size: 48 x 48mm.
Control output 1: relay output.
Control output 2:--.
Auxiliary output: -.
Power supply voltage: AC100 ~ 240V.
Terminal type: screw terminal table type.
Input category: full range multi input.
Heater break, SSR fault detection function: -.
Communication: -.
Event input: -.
Remote SP input: -.
Transfer output: -.
Using large font PV display (white), improve visibility.
Selection, operation and setting.
Functional performance of input and output points.
Support for more extensive range of applications.
Using high PV 15.2mm display (white), improve visibility.
High speed sampling to achieve 50ms.
With auxiliary output (maximum 3 points), event input (maximum 4 points), the transmission output,
Remote SP input function, support for a vaariety of applications E5CZ-Q2 Communications Manual.
E5CC 60mm has a depth of slender body.
The use of communication adapter cable (sold separately) connected with a computer.
After that, no power supply connection can be set.
It can be easily set by CX-Thermmo (sold separately) E5CZ-Q2 Manual.
Easy to connect with PLC through no program communication.
Combined temperature control device through component communication.