Data Setting Console Connecting Cable, For C200H-DSC01.
2MControl method: Semiclosed loop with automatic trapezoid or S-curve acceleration/deceleration CS1D-CPU67S PDF.
Control output signals: Analog.
Controlled axes: 2 axes max.Model: CPM2A-40CDT-D. Power supply: DC power supply.
Output type: Transistor sinking.
Inputs points: 24 points.
Outputs points: 16 points.2-m Connecting Cable included (No other Connecting Cables required CS1D-CPU67S).Model : CV500-CPU01-V1.
SFC / Ladder 512 (with RAM30K words, the top internal link).100 to 120/200 to 240 VAC (switchable), APF/PCF.Output method: Transistor sinking.
Inputs: 12 CS1D-CPU67S PDF.
Outputs: 8.Name: Three-tier Screw Terminal Block.
Sppecifications: Outputs; 16 outputs; NPN;
With Short-circuit and,
Disconnected Line Detection CS1D-CPU67S Manual.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CS1D-CPU67S PDF.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON OPERATION MANUAL. Model: C200H-OA224.
No. of points: 12 pts.
Specifications: 0.5 A, 250VAC.Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Unit with MECHATROLINK-II interface.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications OMRON OPERATION MANUAL.
Direct operation by ladder programming.
Control mode: Position control,
speed control or torque control;
No. of axes: 16 axes.
No. of unit numbers allocated: 1.
Currennt consumption : 5V, 0 CS1D-CPU67S OPERATION MANUAL. 36A; 24V,--.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management OMRON OPERATION MANUAL.
Control Servos for up to 16 axes in,
a motion network with one Position,
Control Unit that supports MECHATROLINK-II CS1D-CPU67S Manual.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.