Specification: 16 input points, 16 output points.Model: CPM2C-8ET1C. Units with relay outputs only.
1 Fujitsu connector.
Outputs: 8 outputs.
Input type: 24 VDC CQM1H-CPU21 PDF.
Output type: sourcing transistor.UM: 31.2K words.
DM: 6K words.
EM: 6Kx3 banks(18K) words.
Instruction processing time (basic instructions): 0.1 µ.s min.
No. of I/O points: 880 points.
Max. no.of con-necting Expansion I/O Racks: 2 Racks CQM1H-CPU21
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.
Max. no. of con-necting Special I/O Units: 10.
RS-232C: NO.Connects SYSMAC LINK Unit, Controller Link Unit to CPU Unit CQM1H-CPU21 PDF.
For 2 Unit.Model: C200H-ME432.
Description: EEPROM, 4K words, battery back-up.with clock(CPU21, CPU23 only).Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 8 outputs;
Signal range selection:
Set separately for each output.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V;
1/4,000 (Settable to 1/8,000) *2 CQM1H-CPU21 PDF.
Conversion perriod: 1 ms/point,
(Settable to 250 μs/point)*2 CQM1H-CPU21 Manual.
Accuracy at ambient temperature of 25°C:
±0.3% of F.S.
External connection: Removable terminal block.
External power supply: 24 VDC +10% -15%, 140mA max OMRON OPERATION MANUAL.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.14A; 24V, 0.14*3.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data.
Analog Output Units for converting binary ,
data into analog output signals OMRON OPERATION MANUAL. Supply voltage: 100 to 120 or 200 to 240 VAC, 50/60 Hz
Output capacity: DC5V, 6.5AModel: C200H-ME831.
Description: EEPROM, 8K words, no clock.Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Unit with MECHATROLINK-II interface OMRON OPERATION MANUAL.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder programming.
Control mode: Position control,
speed control or torque control;
No. of axes: 16 axes.
No. of unit numbeers allocated: 1 CQM1H-CPU21 OPERATION MANUAL.
Current consumption : 5V, 0.36A; 24V,--.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes in,
a motion network with one Position,
Control Unit that supports MECHATROLINK-II CQM1H-CPU21 Manual.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.