Required for Analog Input and Output Units: For two Analog Units.Name: I/O Control Unit.
Specifications: Applicable systems,
Duplex CPU, Dual I/O Expansion System only;
Duplexing, Supported;
Online Replacement, Supported;
Mounting Backplane, Expansion Backplane;
Connecting Cable, CS1W-CN@@3,
CS-series Connecting Cable CPM2A-20CDT1-D PDF.
Current consumption: 5V system, 0.20A;
26V system, -- CPM2A-20CDT1-D
Standards: UC1, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables. Name: Clamp Terminal Blocks.
Specifications: Inputs; 16 inputs ; NPN; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CPM2A-20CDT1-D PDF.
Branching is easily made with CompoNet.
Wiring material cost can bbe reduced CPM2A-20CDT1-D Manual.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site CPM2A-20CDT1-D PDF.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Name: Connector.
Model: C200H-CE002.2 thermocouple inputsModel: CPM2C-32CDT1M-D. CPU Unit: Units with 32 I/O points OMRON INSTRUCTION SHEET.
2 MIL connectors.
Inputs: 16 inputs.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: --.Specification: Platinum resistance thermometer input (Pt, JPt),
ON/OFF or advanced PID control,
tran-sistor (PNP) output, 2 loops OMRON INSTRUCTION SHEET. CV500-RM SYSMAC BUS Remote I/O Master Unit (optical) CV500-RM211.
Light type.Name: Compact Connectors.
Specifications: Outputs; 4 outputs; PNP.
Bit slave of smallest class in industry,
Innovation in wiring for any type of machinery.
Available in 2 types: 2-point Bit Slave Unit,
and 4-poiint Bit Slave Unit OMRON INSTRUCTION SHEET CPM2A-20CDT1-D INSTRUCTION SHEET.
Compact size for installation in limited space.
Save space and wiring since bit slave can be,
installed near I/O devices.
Industry first bit slave connectable with round,
cabless which can be easily purchased at a lower price CPM2A-20CDT1-D Manual.
Connectable with flat cables, too for easy wiring.
Cables are selectable depending on applications.