C200HW Backplane PLATE ALPHA CPU ADAPTOR C200HW-AB001Applicable CPU Units: CQM1H-CPU51/61.
Connection location and number of Units: One Unit only.The Unit must be connected between the Power Supply Unit and the CPU Unit CP1L-M40DR-A PDF.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 170 g max.Model: C500-CE243.
Connection : Pressure welded.
FCN-367J024-AU/FModel: C500-CN512N.
Cable length 50cm CP1L-M40DR-A
CV Series C Series Expansion ← → I / O device CPU Connecting cable(Vertical-wired)Model: C200HW-ME64K.
Capacity: 64K words.Name: Clamp Terminal Blocks.
Specifications: Inputs/Outputs;
8 inputs/8 outputs ; NPN; -- CP1L-M40DR-A PDF.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1L-M40DR-A PDF.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. CP1W-CIF41.
One Ethernet Option Board can be mounted in eitther option board slot 1 or 2 OMRON HOST CONNECTION MANUAL CP1L-M40DR-A Manual.
Note: Cannot be used for the CP1L-L10.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Pulse Input Unit.
Input points : 4 pulse inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.20A; 26V, 0 OMRON HOST CONNECTION MANUAL. 16A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value OMRON HOST CONNECTION MANUAL.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and spacce compared,
with previous systems CP1L-M40DR-A HOST CONNECTION MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1L-M40DR-A Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.