CPU Unit: CP1H-XA CPU Units.
Specifications: CPU type, Memory capacity: 20K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Analog inputs: 4, Analog outputs: 2;
Power supply, DC power supply; Output method, Transistor output (sourcing);
Inputs, 24; Output, 16 CP1L-M30DR-A PDF.
Standards: UC1, N, L, CE.
4 Axis Position Control and Comprehensive Programmable Controller CP1L-M30DR-A
The CP1H-X with pulse outputs for 4 axes.
The CP1H-Y with 1-MHz pulse I/O.
The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O. Product name: E@@S type CPU Units with 10 I/O Points CP1L-M30DR-A PDF.
Specifications: Power Supply, 24 VDC; Inputs, 6; Outputs, 4;
Output type: Relay.
Program capacity: 2K steps.
memory Data capacity: 2K words.
External powersupply(24 VDC): --.
Current consumption: 5 V, 0.08A; 24 V，0.04A.
Standards: UC1, N, L, CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient CP1L-M30DR-A PDF.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection OMRON INSTRUCTIONS REFERENCE MANUAL. For C200H-PRO27-E Hand-held Programming Console ming Console.
4m.High-speed Counter Unit
A High-speed Counter Unit counts input signals from incremental rotary encoders or other sources.

Name: High-speed Counter Module.
Model: C200H-CT001-V1.
Number of axes: 1 axis/Unit.
Operating modes: 6 OMRON INSTRUCTIONS REFERENCE MANUAL. Supply voltage: 24 VDC
Operating voltage range: 20.4 to 28.8 VDC
Power consumption: 100 W max.
Output capacity: 112 A, 5 VDCSpecifications: 16 Kwords with clock CP1L-M30DR-A Manual. Unit type: CS1 Special I/O Units.
Product name: Analog Input Unit (100 mV).
Input points : 8 inputs.
Signal range: 0 to 100 mV, ±100 mV OMRON INSTRUCTIONS REFERENCE MANUAL.
Conversion speed (resolution):
200ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.08A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and spacce compared,
with previous systems CP1L-M30DR-A INSTRUCTIONS REFERENCE MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1L-M30DR-A Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.