Name: e-CON Connectors.
Specifications: Inputs/Outputs;
16 inputs /16 outputs; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CP1H-XA40DT-D PDF.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1H-XA40DT-D
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to ddetect the location and,
content of the error CP1H-XA40DT-D PDF CP1H-XA40DT-D Manual. C500-ID Special I/O Unit ID Sensor Unit General Purpose C500-IDS21.Expands G730 output capacity of G730 remote master ; adds 32 or 16 outputs, DIP switch selected.Protector for Simple Expansion I/O Rack connector CV500-COV04I/O bits: 1, 280 (Expan-sion Racks: 3) CP1H-XA40DT-D PDF.
Program capacity: 30K steps.
Data memory capacity: 64K words (DM: 32K words, EM: 32K words ×1 bank)Supply voltage: 100 to 120 or 200 to 240 VAC (automatic voltage setting), 50/60 Hz
Operating voltage range: 85 to 132 or 170 to 264 VAC
Power consumption: 200 VA max OMRON OPERATION MANUAL.
Output capacity: 12 A, 5 VDCNumber of outputs: 32 pts.
Max. switch-ing capacity: 0.5 A at 24 V DC.
External connector: Connector.
Weight: 210 g max.Name: Three-tier Screw Terminal Block.
Specifications: Inputs; 8 inputs; PNP;
With Short-circuit and,
Disconnected Line Detection OMRON OPERATION MANUAL.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CP1H-XA40DT-D OPERATION MANUAL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction OMRON OPERATION MANUAL.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CP1H-XA40DT-D Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.