Power supply: AC power supply.
Output method: Transistor output source type.
Inputs points: 24 points.
Outputs points: 16 points.80 cm for CP1W/CPM1A Expansion UnitsModel: CPM2C-10CDT1M-D CP1H-X40DT1-D PDF. CPU Unit: Units with 10 I/O points.
2 MIL connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: --.Model : C500-PS223.
100 to 120 VAC or 200 to 240 VAC (selectable) CP1H-X40DT1-D
Output ratings: 12 A, 5 VDC.C500-OD I/O Unit Transistor Output 32 pts C500-OD412(3G2A5-OD412).
DC12～48V 0.3A.C500-IA I/O Unit AC Input 32 pts C500-IA122(3G2A5-IA122).
AC100-120V 10mA CP1H-X40DT1-D PDF. Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 4 inputs ; 2 outputs.
Signal range selection:
Set separately for each input and output.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V,
4 to 20 mA.
Resolution: 1/4,000 (Settable to 1/8,000) CP1H-X40DT1-D PDF CP1H-X40DT1-D Manual.
Conversion period: 1 ms/point,
(Settable to 500 μs/point).
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F.S. Current: ±0.2% of F.S;
Voltage: ±0.3% of F.S. Current: ±0.3% of F.S.
External connection: Removable terminal block.
External power supply: 24 VDC +10% -15%, 140mA max OMRON HOST CONNECTION MANUAL.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.58A; 24V, --.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data OMRON HOST CONNECTION MANUAL.
Analog Output Units for converting binary ,
data into analog output signals. Connecting I/O control module and interface module.
Cable length: 0.3 m.Model: CPM2A-20CDR-A. Power supply: AC power supply.
Output type: Relay.
Inputs points: 12 points.
Outputs points: 8 points.Name: CS1D Processcontrol CPU Unit OMRON HOST CONNECTION MANUAL.
Specifications: CPU section,
Equivalent to the CS1D-CPU67H;
Loop control section,
LCB05D Opeeration method:
Function block method,
Number of function blocks:
500 blocks max CP1H-X40DT1-D HOST CONNECTION MANUAL.
Minimum operation cycle:
100 ms PID control method:
PID with two degrees of freedom,
(with autotuning function);
Current consumption: 5 V ssystem, 1 CP1H-X40DT1-D Manual. 04A;
26 V system, --.
Standards: UC1, N, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables.