Model: C500-CE401.
Solder pin connector cover 40PType: CS Special I/O Unit.
Connected ID System: V680 Series; 2 Heads.
External power supply: 24VDC CP1E-N60DT-D PDF.
No. of unit numbers used: 2 unit number.
Current consumption: 5V, 0.32A;
24V, --; External, 0.36A.
Communication Unit Dedicated for RFID V680,
Allowing Direct Connection to OMRON PLC CJ/
CS/NJ-series.
Communication unit for connecting RFID V680-series,
which can be used around the world, directly to PLC CP1E-N60DT-D
Allows batch transfer of data up to 32 kbytes. Name: MIL Connectors.
Specifications: Inputs/Outputs;
16 inputs/16 outputs ; NPN; -- CP1E--N60DT-D PDF CP1E-N60DT-D Manual.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1E-N60DT-D PDF.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. C500-GP Accessory Peripheral Devices (GPC) Graphic Programming Console C500-GPC03-E OMRON REFERENCE MANUAL. Unit type: CJ1 Special I/O Units.
Product name: Analog Input Unit.
I/O points: 4 inputs;
Signal range selection: 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 to 10 V, 4 to 20mA;
1/4,000(Settable to 1/8,000)*2 .
Conversion period: 1 ms/point,
(250 μs/point can also be set OMRON REFERENCE MANUAL. )*2.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F. S. Current: ±0.4% of F.S.
External connection: Removable terminal block.
No. of unit nnumbers allocated: 1 CP1E-N60DT-D REFERENCE MANUAL.
Current consumption: 5V, 0.42A; 24V, --.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup OMRON REFERENCE MANUAL.
Analog Input Units for cconverting analog input,
signals into binary data CP1E-N60DT-D Manual.
Analog Output Units for converting binary ,
data into analog output signals. For 3-slot Backplane.