Number of outputs: 8 pts.
Max. switch-ing capacity: 0.4 A at 100 to 240 V AC.
External connector: Terminal block.
Weight: 240 g max.Unit type: CJ1 Basic I/O Units CP1E-N30S1DT-D PDF.
Product name: Transistor Output Units.
Specifications: Output type, Sinking;
I/O points, 32 outputs(High speed);
Maximum switching capacity, 24VDC, 0.5A;
Commons, 16 points, 1 common;
External connection, MIL connector CP1E-N30S1DT-D
No. of words allocated: 2 words.
Current consumption: 5V, 0.22A; 24V, --.
Standards: N, L, CE.
A Wide Range of Basic Output,
Units for High Speed Output,
and Different Applications.
These Output Units receive the ,
results of output instructions ,
from the CPU Unit and perform ON/OFF,
control for external devices CP1E-N30S1DT-D PDF.
High-speed Output models CJ1W-OD213 and,
CJ1W-OD234 can help to increase system.
throughput.
Output method: Transistor sinking.
Inputs: 12.
Outputs: 8.Name: Three-tier Screw Terminal Block CP1E-N30S1DT-D PDF CP1E-N30S1DT-D Manual.
Specifications: Inputs/Outputs;
8 inputs/8 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced OMRON PROGRAMMING MANUAL.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON PROGRAMMING MANUAL. Name: Remote I/O Master.
Model: C200HW-SRM21-V1.Name: PID Control Module.
Model: C200H-PID02.
Output: Voltage output.Connects to right-hand side of CPU block.NO. OF I/O SLOTS: 8 SLOTSName: Two-tier Screw Terminal Block.
Specifications: Outputs; 16 outputs; PNP OMRON PROGRAMMING MANUAL.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CP1E-N30S1DT-D PROGRAMMING MANUAL.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CP1E-N30S1DT-D Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.