Model: CPM2C-10C1DTM-D. CPU Unit: Units with 10 I/O points.
2 MIL connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sinking transistor CP1E-N30DR-A PDF.
Internal clock: Yes.Model: C200HW-ME32K.
Capacity: 32K words.Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Unit with MECHATROLINK-II interface.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications CP1E-N30DR-A
Direct operation by ladder programming.
Control mode: Position control,
speed control or torque control;
No. of axes: 4 axes.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0 CP1E-N30DR-A PDF. 36A; 24V,--.
Standards: UC1, CE.
Decreease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management CP1E-N30DR-A Manual.
Control Servos for up to 16 axes in,
a motion network with one Position,
Control Unit that supports MECHATROLINK-II.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association CP1E-N30DR-A PDF. I/O Link of 8 input bits and 8 output bits Name: e-CON Connectors.
Specifications: Outputs; 16 outputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet OMRON PROGRAMMING MANUAL.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site OMRON PROGRAMMING MANUAL.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. I/O bits: 5, 120 (Expan-sion Racks: 7).
Program capacity: 250K steps.

Data memory capacity: 448K words (DM: 32K words, EM: 32K words ×13 banks) OMRON PROGRAMMING MANUAL CP1E-N30DR-A PROGRAMMING MANUAL. Inputs: 8I/O link input bits.
Outputs: 8I/O link input bits.C200H A Backplane Isolating Panel For 3 Slots C200H-ATT02Model: CPPM2C-24EDT1 CP1E-N30DR-A Manual. Units with 24 I/O points
2 Fujitsu connectors.
Inputs: 16 inputs.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.