Model: CPM2C-16ETM. Units with transistor outputs only.
1 MIL connector.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sinking transistor.C500-OD I/O Unit Transistor Output 32 pts C500-OD218 CJ2M-CPU32 PDF.
DC12～24V 0.3A.Specifications: 2 × RS-232C ports, protocol macro function.Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications CJ2M-CPU32
Positioning functions: Memory operation,
Direct operation by ladder programming,
I/O communications: 64 nodes;
No. of axes: 16 axes CJ2M-CPU32 PDF.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.46A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operaation feature of EtherCAT,
improve the production efficiency CJ2M-CPU32 Manual.
The EtherCAT communications with,
100Mbps baud rate enables fast,
and accurate position control CJ2M-CPU32 PDF.
A wide range of position control,
functions are available with,
this position control unit. Name: e-CON Connectors.
Specifications: Outputs; 16 outputs; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet OMRON OPERATION MANUAL.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site OMRON OPERATION MANUAL.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Name: CS1D Processcontrol CPU Unit.
Specifications: CPU section,
Equivalent to the CS1D-CPU67H;
Loop control section,
LCB05D Operation method:
Functtion block method,
Number of function blocks:
500 blocks max OMRON OPERATION MANUAL CJ2M-CPU32 OPERATION MANUAL.
Minimum operation cycle:
100 ms PID control method:
PID with two degrees of freedom,
(with autotuning function);
Current consumption: 5 V ssystem, 1 CJ2M-CPU32 Manual. 04A;
26 V system, --.
Standards: UC1, N, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables.