Model: C200H-MR833.
Description: RAM, 8K words, battery back-up.with clock(CPU21, CPU23 only).Unit type: CS1 Special I/O Units.
Name: High speed Counter Units CJ1G-CPU42P PDF.
Specifications: Countable channels,
2; Encoder A and B inputs,
pulse input Z signals, Open collector,
Input voltage: 5VDC,12VDC, or 24VDC,
(up to 2 axes for 5 V or 12 V input),
RS-422 line driver;
Max. counting rate, 50kHz, 500kHz CJ1G-CPU42P
No. of unit numbers allocated: 4.
Current consumption: 5V, 0.45A; 26V, --.
Standards: UC, N, L, CE.
High-Speed, Flexible Control With A,
Wide Array of Features.
Equipped with 2 or 4 Counters and counts,
over a maximum binarry range of 32-bits CJ1G-CPU42P PDF CJ1G-CPU42P Manual.
Accepting input pulse frequencies of up,
to 500 kHz allows precise control of fast motions.
The Unit is equipped with 4 Digital Inputs,
4 Digital Outputs and 28 Soft Outputs.
A maximum response time of 0.5 ms guarantees,
high-speed closed loop control of applications CJ1G-CPU42P PDF. Type: CJ1 Special I/O Unit.
Connected ID System: V680 Series; 2 Heads.
External power supply: --.
No. of unit numbers used: 2 unit number.
Current consumption: 5V, 0.32A;
24V, 0.26A; External, --.
Communication Unit Dedicated for RFID V680,
Allowing Direct Connection to OMRON PLC CJ/
CS/NJ-series OMRON OPERATION MANUAL.
Communication unit for connecting RFID V680-series,
which can be used around the world, directly to PLC.
Allows batch transfer of data up to 32 kbytes. NO. OF I/O SLOTS: 5 SLOTSName: MIL Connectors.
Specifications: Inputs/Outputs;
16 inputs/16 outputs ; NPN; -- OMRON OPERATION MANUAL.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-leveel I/O distribution reduces,
wiring in the system CJ1G-CPU42P OPERATION MANUAL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction OMRON OPERATION MANUAL.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CJ1G-CPU42P Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.