Model: C200H-DA004.
Input points: 8.CV500-BS CPU Bus Unit BASIC Unit CV500-BSC31.
RS-232C: 2 ports.
Centronics: 1 port.Unit type: CJ1 Basic I/O Units C200HW-SLK23 PDF.
Product name: Transistor Output Units.
Specifications: Output type, Sourcing;
I/O points, 8 outputs;
Maximum switching capacity, 24VDC,
0.5A Short-circuit protection;
Commons, 8 points, 1 common;
External connection, Removable terminal block C200HW-SLK23
No. of words allocated: 1 word.
Current consumption: 5V, 0.10A; 24V, --.
Standards: UC1, N, L, CE.
A Wide Range of Basic Output,
Units for High Speed Output,
and Different Applications C200HW-SLK23 PDF.
These Output Units receive the ,
results of output instructions ,
from the CPU Unit and perform ON/OFF,
control for external devices.
High-speed Output models CJ1W-OD213 and,
CJ1W-OD234 can help to increase system.
throughput. Analog outputs: 2 pointsName: RS-422A Converter.
Specifications:
Converts RS-233C to RS-422A/RS-485 C200HW-SLK23 PDF.
Standards: UC1, N, L, CE.
The RS-232C port of the SYSMAC series,
can be changed into RS-422A/485 port.
The CJ1W-CIF11 RS-422A Converter connects,
direectly to a CS/CJ-series RS-232C port and,
converts RS-232C to RS-422A/485 C200HW-SLK23 Manual. C500-DU I/O Unit C500 Blank Slot Spacer C500-DUM01 OMRON PROGRAMMING MANUAL. Unit classification: CJ1 Special I/O Units.
Product name: Temperature Control Units.
Specifications; No. of loops: 4 loops;
Temperature sensor inputs: Thermocouple,
input (R, S, K, J, T, B, L);
Control outputs: Open collector NPN outputs (pulses).
No. of unit numbers allocated: 2 OMRON PROGRAMMING MANUAL.
Current consumption: 5V, 0.25A; 24V, --.
Standards: UC1, N, L, CE.
A Single Unit Performing All the Functions of,
4 Temperature Controllers.
A Special I/O Unit with direct input,
of thermocouple or resistance thermometer,
PID control with 2 degrees of freedom,
and open collector output OMRON PROGRAMMING MANUAL. Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications.
Positioning functions: Memory operation,
Direct operation by ladder programming;
No. of axes: 16 axes.
No. of unit numbers alloccated: 1 C200HW-SLK23 PROGRAMMING MANUAL.
Current consumption : 5V, 0.46A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency.
The EtherCAT communications with,
100Mbps bbaud rate enables fast,
and accurate position control C200HW-SLK23 Manual.
A wide range of position control,
functions are available with,
this position control unit.