LK Automation Limited LK Automation Limited
Download Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Catalog Download
OMRON DZ-10GW-1B datasheet PDF
Product model: DZ-10GW-1B
Name: Special-purpose Basic Switch
Brand: OMRON
Sort: PDF datasheet
File language: English
Actuator: Plunger.
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 2NC(Snap-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available DZ-10GW-1B PDF. )
M12-connector models are also available, saving on labor and,
simplifying replacement DZ-10GW-1B
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Actuator: Plunger.
Conduit size: 2-conduit; M20 DZ-10GW-1B PDF.
Built-in switch mechanism: 1NC/1NO (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability DZ-10GW-1B PDF.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Sealed pin plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models DZ-10GW-1B datasheet.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation DZ-10GW-1B datasheet.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
Related products
OMRON
Special-purpose Basic Switch
DZ-10G-1A
OMRON Special-purpose Basic Switch DZ-10G-1A
Terminal: Solder terminal -1A. Actuato
OMRON
Special-purpose Basic Switch
DZ-10G-1B
OMRON Special-purpose Basic Switch DZ-10G-1B
Terminal: Screw terminal -B. Actuator:
OMRON
Special-purpose Basic Switch
DZ-10GV-1B
OMRON Special-purpose Basic Switch DZ-10GV-1B
Terminal: Screw terminal -B. Actuator:
OMRON
Special-purpose Basic Switch
DZ-10GV22-1A
OMRON Special-purpose Basic Switch DZ-10GV22-1A
Terminal: Solder terminal -1A. Actuato