Classification: Standard.
Contact gap: G (0.5 mm).
Drip-proof terminal protective cover: Not provided.
Actuator: Short spring plunger.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types ZR-XRH1 PDF ZR-XRH1
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Optical system: diffuse type.
Detection distance: 200 positive and negative 50mm.
Beam shape: linear beam.
Beam diameter: 900mm * 100 m ZR-XRH1 PDF.
Resolution: 5 m.
Cable length: 2m. Optical system: Diffuse reflective.
Beam shape: Line beam.
Sensing distance: 300±200 mm.
Resolution: 300 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Roller leaf spring.
Best-selling Basic Switch Boasting ZR-XRH1 PDF.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Shape: Heat-resistant, cylindrical.
Dimensions: M12 x 22 mm.
Sensing distance: 2 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpiecee Displacement ZR-XRH1 datasheet.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).

Easily perform calculation for two Sensors by using a Calculating Unit ZR-XRH1 datasheet.
Prevent mutual interference for up to five Units by using a Calculating Unit.