Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Leaf spring.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types Z-15E PDF.
A series of standard models for micro loads is available Z-15E
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Appearance: Sensor head: 1.5 m type.
Temperature: Measurement range, –25 to 60°C;
Measurement precision, ±0.3°C (at 25°C); Resolution, 0.1°C.
Relative humidity: Measurement range, 0 to 99%;
Measurement precision, ±2 Z-15E PDF. 5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
Accessories: Mounting screw (M3 x 8) x 1.
Easy temperature and humidity control with an SD Card. Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome Z-15E PDF. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at or whichever way it is inserted.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area. Smart Static Electricity Sensing: Making Static Electricity Visible.
Compact sensor head and smart digital amplifier measure,
the electrostatic charge quantity of workpieces at all times.
Multi-point measurements and data logging of the static,
electricity quantity can be performeed easily Z-15E datasheet.
Best long-distance, high-precision measurements in the industry. Size: 8 dia.
Type: Ultra-low-load Type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have beeen,
certified for safety standards, refer to your OMRON website Z-15E datasheet. Optical fiber division.
Fiber length: 1 meters.
Allowable bending radius: 30mm above.