Standard certification: No.
Insulation mode: three end two-way photoelectric switch.
Zero trigger function: No.
Action indicator: No.
Applicable load of output: AC100 3A ~ 240V G70D-SOC08 PDF.
Input rated voltage: DC24V.
With the LY1, LY2 large power relay with the same shape of the G3H series, the new international standard certification (-VD type).
Achieved UL, CSA, EN (VDE certification) standard certification G70D-SOC08 (type -VD)
Socket terminal type of same size with LY (1 pole, 2 pole type).
A model with an action indicator to check the status of the input. (type N)Terminal (Wire connection): Push-In Plus Terminal G70D-SOC08 PDF.
Classification: Miicroloads G70D-SOC08 Manual.
Latching lever (Test switch): No.
Rated input voltage: AC/DC, 24V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel G70D-SOC08 PDF.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location) OMRON INSTRUCTION MANUAL.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Number of elements: 3.
Insulation method: Phototriac.
Rated supply voltage: 12 to 24 VDC OMRON INSTRUCTION MANUAL.
Input method: No-voltage input (open and short circuit input).
Applicable motor: 0.75 kW (4.8 A), 200 to 220 VAC.
Soft-start/stop Function Starts and Stops.
Three-phase Motors Smoothly and.
Economically G70D-SOC08 INSTRUCTION MANUAL.
Function like an inverter by holding down the starting current.
Comply with UL, CSA, IEC (400-V models only), and JEM OMRON INSTRUCTION MANUAL.
requirements.
Mount with screws or to DIN tracks.
Compact monobloock construction for the G3J-T217BL G70D-SOC08 Manual.
(W: 100 × H: 100 × D: 110 mm) with a heat sink.
Snubber circuit and varistor are built-in.
Operation indicator.