Appearance: Shielded, M12.
Sensing distance: 4 mm.
Output: NPN.
Model: Operation mode NO.
Aluminum and Iron Both.
Detectable from Long Distances. Protection tube diameter: screw pitch W1/4 E2EH-X7D2 PDF.
Wire length: 1m.
Core line type: K (CA).
Temperature sensing part of temperature controller.
In the application field of packaging molding machine is widely used,
Further strengthened the high cost models E2EH-X7D2
Easy to install / replace the structure.
With springs, you can use the active part (E52Z-CA1D-40). Name: Terminal Unit(Includes bus system without backplane.).
No. of control points: 18 (See note 1 E2EH-X7D2 PDF. ).
Functions: Not equipped with communications terminals for power supply,
communications, and setting devices.
New DIN Track Mounting Temperature.
Controller.
Two channels of temperature control available despite width of,
only 22.5 mm.
The Temperature Controller itself can be replaced without,
changing terminal wiring E2EH-X7D2 PDF.
Use in combination with a compact Setting Dissplay Unit to,
reduce communications programming requirements E2EH-X7D2 Manual.
Front-panel LED indicators for easy operation monitoring.
Power supply and communications wiring not required between,
Units when mounted side-by-side OMRON INSTRUCTION sheet.
CompoWay/F communications protocol supported.
UL, CSA, and CE Marking compliance. Size: 96 x 96mm.
Control output 1: double relay (proportional valve).
Auxiliary (alarm) output: 4.
Transfer output: -.
Event input: -.
Communication: -.
Break detection: -.
Power supply voltage: AC100 ~ 240V OMRON INSTRUCTION sheet.
E5 - C series of new products program.
Maximum 256 segment of the program capacity,
Support for multiple applications.
Can be set up to 8 procedures (mode) x 32 (step) procedure.
The use of high 25mm (E5AC-T), 18mm (E5AC-T) PV display (white),
Improve visibility.
Not only on the top of the body, but also on the front,
The use of communication adapter cable (sold separately) connected to the computer after,
No power connection can be set OMRON INSTRUCTION sheet.
It can be easily set by CX-Thermo (sold separately).
High speed sampling to achieve 50ms E2EH-X7D2 INSTRUCTION sheet.
With auxiliary output (4 points), event input (maximum 6 points), the transmission output,
Support a variety of applications.
Slender fuselage depth 60mm.
Easy to connect with PLC through no program communicatiion E2EH-X7D2 Manual.
Combined temperature control device through component communication.
Add position proportional control type, also support control valve control.