Actuator: Adjustable rod lever.
Conduit openings: G1/2 (PF1/2).
1NC/1NO (Snap-action).
Robust safety limit switch with metal housing.
Slow-action and snap-action contact with,
certified direct opening operation certification D4N-9120 PDF.
Direct opening mechanism (NC contacts only) added to,
enable opening contacts when faults occur, such as fused contacts.
Safety of lever settings ensured using a mechanism that,
engages a gear between the operating position indicator plate and the lever D4N-9120
Equipped with a mechanism that indicates the applicable,
operating zone, as well as push-button switching to control left and right motion D4N-9120 PDF.
Head seal structure strengthened to improve seal properties.
(TÜV: IEC IP67, UL: NEMA 3, 4, 4X, 6P, and 13).
Wide standard operating temperature range: –40 to 80°C (standard type).
Certified standards: UL, CSA, EN (TÜV), and CCC.
Drive rod: panel mounted transverse ball plunger type D4N-9120 PDF.
Closed switch with built-in standard switch, long service life,
10 million times above the high durability of the micro switch to ensure repeatability.
Small limit switch for Chinese market.
The panel mounting plate is the same as the Z- standard switch.
Compared with the micro switch, it is more suitable for the application of higher mechanical strength, dust proof and anti drop performance OMRON INSTRUCTION sheet.
Resin molding type terminal.
Certified by UL, CSA and CCC (China standard). A closed switch with a built-in standard type switch, with a long service life,
10 million times above the high durability of the micro switch to ensure repeatability OMRON INSTRUCTION sheet.
Smalll limit switch for Chinese market D4N-9120 Manual.
The panel mounting plate is the same as the Z- standard switch.
Compared with the micro switch, it is more suitable for the application of higher mechanical strength, dust proof and anti drop performance OMRON INSTRUCTION sheet.
Resin molding type terminal.
Certified by UL, CSA and CCC (China standard). Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Mechanical lock Solenoid release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @.
Conduit size (See Note.): G1/2.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key innsertion point D4N-9120 INSTRUCTION sheet.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lockk Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames D4N-9120 Manual.
The plastic material makes the Slide Key suitable,
for lightweight doors.