Drive rod: panel mounted transverse ball plunger type.
Closed switch with built-in standard switch, long service life,
10 million times above the high durability of the micro switch to ensure repeatability D4B-5181N PDF.
Small limit switch for Chinese market.
The panel mounting plate is the same as the Z- standard switch.
Compared with the micro switch, it is more suitable for the application of higher mechanical strength, dust proof and anti drop performance D4B-5181N
Resin molding type terminal.
Certified by UL, CSA and CCC (China standard). Drive rod: ball type.
Terminal specification: solder terminal.
The protectioon structure is in conformity with the JIS''s anti immersion type, IP67 IEC (except for the terminal part) D4B-5181N PDF D4B-5181N Manual.
Can be used in the environment temperature -40 ~ +85.
Through the use of gold alloy bar, contact springs to achieve longevity and high contact reliability. Actuator: Arm lever D4B-5181N PDF.
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 2NC/1NO MBB (Slow-action).
Compact, Plastic-body Safety-door.
Hinge Switch Designed for Saving.
Space in Machines and Other.
Equipment.
Lineup includes three contact models with 2NC/1NO and.
3NC contact forms in addition to the previous contact forms OMRON INSTRUCTION sheet.
1NC/1NO, and 2NC. Models with MBB contacts are also available.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads. Actuator: Roller lever (resin lever, resin roller).
Conduit size: 2-conduit; M20.
Built-in switch mechanism: 2NC/1NO (Slow-action) OMRON INSTRUCTION sheet.
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contaact forms in addition to the previous contact forms 1NC/1NO and 2NC D4B-5181N INSTRUCTION sheet.
M12-connector models are available, saving on labor and,
simplifying replacement OMRON INSTRUCTION sheet.
Standardized gold-clad contacts provide high contact reliability D4B-5181N Manual.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC.