Expands G730 input capacity of G730 remote master;
adds 32 or 16 inputs,
DIP switch selected.C200H CPU 100/200-240VAC C200H-CPU02-E.Name: Loop-control CPU Unit CP1W-20EDT1 PDF.
I/O bits: 960 bits.
Program capacity: 20K steps.
DM words: 32K words.
EM words: 32K words × 1 bank E0_00000 to E0_32767.
Versatile Machine Control with the,
Highest Performance Standards in the Industry. Connects Power Supply Adapter and SYSMAC NET Link Unit CP1W-20EDT1
Included with C200H-APS02.CV500-BS CPU Bus Unit BASIC Unit CV500-BSC11.
RS-232C: 2 ports, RS-422: 1 port.Model: C500-CN331.
Cable length: 30 m.
Programming Console Connecting Cable CP1W-20EDT1 PDF.
For extension and connection of FIT of FIT.
Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Resistance Thermocoouple Input Units CP1W-20EDT1 Manual.
points Input: 8 inputs.
Signal range selection:
Set separately for each input.
I/O type: Pt100, JPt100.
Conversion speed (resolution):
250 ms/8 inputs CP1W-20EDT1 PDF.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 26V, 0.06A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value OMRON I/O Wiring Diagram.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them OMRON I/O Wiring Diagram.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previouus systems OMRON I/O Wiring Diagram CP1W-20EDT1 I/O Wiring Diagram.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1W-20EDT1 Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.