Name: e-CON Connectors.
Specifications: Inputs; 32 inputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CP1H-XA40DT1-D PDF.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1H-XA40DT1-D
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CP1H-XA40DT1-D PDF CP1H-XA40DT1-D Manual. Model : CV500-CN127.
BASIC unit for connecting the printer (1.5m)(Centronics).Name: Two-tier Screw Terminal Block.
Specifications: Outputs; 16 outputs; NPN.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CP1H-XA40DT1-D PDF.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON REFERENCE MANUAL. Name: Wired Master.
Model: C200H-RM201.Model : C500-LDP01-V1.
Has 40 instructions (same as a C20P.) Input and output points (16 each.).Unit type: CS1 Basic I/O Units OMRON REFERENCE MANUAL.
Product name: AC Input Unit.
Specifications: 200 to 240 VAC,
16 inputs.
Mountable Racks: CPU Rack, CS1W-BC,
@@3,YES, @@2, YES;
C200HX/HG/HE Expansion I/O Rack, No.
CS1 Expannsion Rack, CS1W-BI,@@3,YES,
@@2, YES; CS1 Long distance Expansion Rack,
Yes; SYSMAC BUS Slave Rack, No CP1H-XA40DT1-D REFERENCE MANUAL.
Words required: (I/O bits: CIO 0000 to CIO 0319), 1 word OMRON REFERENCE MANUAL.
Current consumption: 5V system, 0. CP1H-XA40DT1-D Manual. 11A;
26 V system, --.
Standards: UC, N, L, CE.
Multi-application Controllers:
From High-performance Machine C,
Highly Reliable Process Control.