Model: C200HW-ME04K.
Capacity: 4K words.Product name: N@@S1- type CPU Units with 30 I/O Points.
Specifications: Power Supply, DC24V; Inputs, 18; Outputs, 12;
Output type: Transistor (sourcing) CJ1W-SCU31-V1 PDF.
Program capacity: 8K steps.
memory Data capacity: 8K words.
External powersupply(24 VDC): --.
Current consumption: 5 V, 0.27A; 24 V，0.02A.
Standards: CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient CJ1W-SCU31-V1
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection CJ1W-SCU31-V1 PDF. Model: CPM2A-30CDR-D. Power supply: DC power supply.
Output type: Relay.
Inputs points: 18 points.
Outputs points: 12 points.General Information
The C200HS-SLK12 SYSMAC LINK fiber-optic module connects the PLC to the SYSMAC
LINK fiber-optic token bus peer-to-peer communications network CJ1W-SCU31-V1 PDF. An external power supply option provides direct pass-through communications in case of modulCV500-FH SYSMAC BUS PC Unit Floppy/Hard Disk Drive For 200 VAC CV500-FHD02.C500-ID I/O Unit DC Input 64 pts C500-ID114(3G2A5-ID114) OMRON REFERENCE MANUAL.
DC12V 7mA.I/O Link of 8 input bits and 8 output bits Unit type: CS1 Special I/O Units CJ1W-SCU31-V1 Manual.
Product name: Isolated-type DC Input Unit.
Input points : 8 inputs.
Signal range: 4 to 20 mA, 0 to 10 V,
0 to 5 V, 1 to 5 V.
Conversion speed (resolution):
250ms/8 inputs.
Externa connection: Removable erminal block OMRON REFERENCE MANUAL.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 26V, 0.06A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value OMRON REFERENCE MANUAL.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and spacee compared,
with previous systems CJ1W-SCU31-V1 REFERENCE MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CJ1W-SCU31-V1 Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.