Cable length: 1.5m.
For the connection between FXCPU and GOT.
Connection between a power supply and an operating switch and a GOT.
Applicable model: HandyGOT GT2710-VTBD-GF PDF. Cable length: 30 meters.
FXCPU GOT.
FXCPU communication function expansion board GOT.
[MINI-DIN 8 pin loose line (row 5 pin interface terminal)].
Applicable model: GT21. Cable length: 30m.
For connection between FXCPU (MINI-DIN8 pin connector) and GOT GT2710-VTBD-GF
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT.
Applicable models: GT16, GT15, GT11, HandyGOT, GT10, GT27, GT25, GT23,, GT21. Protective film for 5 GT2710-VTBD-GF PDF. 7 inch screen.
Transparent (frame: white), 5.
Applicable model: GT14. Cable length: 0.5m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU.
Applicable models: GT16, GT15, GT11. Cable length: 10.6m.
Long distance connection between CPU (A Series) and GOT for QnAS/AnSCPU/ motion controller GT2710-VTBD-GF PDF.
Long distance connection between A7GT-CNB and GOT.
Applicable models: GT16, GT15, GT11. Protective film for 6.5 inch screen (for HandyGOT).
Scrub (frame: white), 5.
Applicable model: used for hand held GOT GT16. Cable length: 1.2m.
For QnA/ACPU/ motion controller CPU (A series, extended basis system) and the connection between GOT MITSUBISHI User's Manual.
Applicable models: GT16, GT15, GT11. Protective film for 8.4 inch screen.
Transparent (frame: white), 5.
Applicable model: GT16. 8.4 inches.
Surface treatment: transparent.
Protective ffilm color: No GT2710-VTBD-GF Manual .
USB protective cover parts: no openings MITSUBISHI User's Manual.
Set number: 5.
Applicable model: GT21. For the QCPU (Q mode) / transport controller CPU (Q Series) bus connection (2 channel) unit standard model.
Applicable models: GT15, GT16, GT27, GT25. Function: the core function of the condensed display.
Picture size: 3.8 inches MITSUBISHI User's Manual.
Resolution: 320 * 128 dot.
Display: TFT monochrome.
Panel color: black.
Power type: DC24V.
Communication interface: RS-232 * 2.
Small body equipped with ethernet!
Compared with the past, the upgrade of 320 x 128dot 4 x high resolution lcd.
HD LCD screen.
Equipped with TFT monochrome 32 gray level of high resolution liquid crystal, compact body design and display the effect is clear.
1, SD memory card module with the interface.
Can be installed to buy the SD memory card module, save the alarm and log data.
2, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
3, RS-422/485 interface.
Can be connected to a variety of FA machines, bar code reader.
4, Ethernet interface.
Up to 2 different manufacturers can bbe connected to the FA machine GT2710-VTBD-GF User's Manual.
Backlight color variety, equipment status at a glance.
The use of direct 5 color backlight, according to the production of equipment, respectively, the use of backlight color / flicker.
In addittion, the control of the backlight can be carried out by connecting the programmable controller GT2710-VTBD-GF Manual . (picture color switching, ON/OFF/ flashing backlight).