For GOT multipoint connection.
Applicable models: GT15, GT16, GT11, GT10, GT27, GT25, GT23, GT21. Oil resistant cap for 12.1 inch screen.
Applicable model: GT16 GT2510-VTBD-GF PDF. 12.1 inches.
Surface treatment: transparent.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25. Cable length: 5.0m.
For the connection between QnAS/AnSCPU/ motion controller GOT (A Series) and CPU GT2510-VTBD-GF
Applicable models: GT16, GT15, GT11. For sound single output.
Applicable models: GT16, GT15, GT27, GT25. Cable length: 3.0m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU GT2510-VTBD-GF PDF.
Applicable models: GT16, GT15, GT11. For the GT1665M-STB.
Applicable model: GT16. Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 10.4 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB GT2510-VTBD-GF PDF.
Resolution: VGA (640 x 480).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities) MITSUBISHI MES Interface Function Manual.
User storage capacity: 15MB (GT16__-VNB__:11MB).
Withh HOST USB and device USB port GT2510-VTBD-GF Manual .
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed MITSUBISHI MES Interface Function Manual.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface MITSUBISHI MES Interface Function Manual.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use drry cloth touch screen on the surface of the water GT2510-VTBD-GF MES Interface Function Manual.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it GT2510-VTBD-GF Manual .