Cable length: 1.5m.
For the connection between QCPU and GOT.
Connection between a power supply and an operating switch and a GOT.
Applicable model: HandyGOT GT1685M-STBA PDF. Coaxial bus unit.
Applicable models: GT15, GT16, GT27, GT25. USB interface protection cover on the front panel of the host computer (for replacement).
For 5.7 inches.
Applicable models: GT15, GT11. Cable length: 10 meters.
FXCPU GOT GT1685M-STBA
FXCPU communication function expansion board GOT.
[MINI-DIN 8 pin loose line (row 5 pin interface terminal)].
Applicable model: GT21. 1 channels for analog RGB output.
Applicable model: GT16. Protective film for 5 GT1685M-STBA PDF. 7 inch screen.
Scrub, 5.
Applicable model: GT15. Protective film for 15 inch screen.
Transparent (frame: white), 5.
Applicable model: GT16. Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 10.4 inches.
Display color: 16 color.
Mounting type: panel mounting type GT1685M-STBA PDF.
Resolution: VGA (640 x 480).
Display device: TFT color.
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities) MITSUBISHI Connection Manual.
User storage capacity: 15MB ((GT16__-VNB__:11MB) GT1685M-STBA Manual .
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed MITSUBISHI Connection Manual.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface MITSUBISHI Connection Manual.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water GT1685M-STBA Connection Manual.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it GT1685M-STBA Manual .