Cable length: 0.7m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU.
Applicable models: GT16, GT15, GT11. USB interface protection cover on the front panel of the host computer (for replacement) GT1595-XTBD PDF.
For 15 inches /12.1 inches /10.4 inches /8.4 inches.
Applicable model: GT15. Protective film for 4.5 inch screen.
Scrub, 5.
Applicable model: GT1030. Protective film for 8 GT1595-XTBD4 inch screen.
Transparent (frame: white), 5.
Applicable model: GT15. Cable length: 5.0m.
For the connection between the two graphic operations.
Applicable models: GT16, GT15, GT11. Protective film for 5 GT1595-XTBD PDF. 7 inch screen.
Transparent (frame: white), 5.
Applicable model: GT15. Cable length: 6m.
The connection between the CC-LINK interface unit and the smart GOT.
Applicable model: HandyGOT. Cable length: 10m.
For connection between FXCPU (MINI-DIN8 pin connector) and GOT.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT GT1595-XTBD PDF.
Applicable models: GT16, GT15, GT11, HandyGOT, GT10, GT27, GT25, GT23,, GT21. Function: high performance and low price in the middle end modeel GT1595-XTBD Manual .
Picture size: 8.4 inches.
Resolution: VGA.
Display: TFT color.
Open frame type MITSUBISHI Gateway Functions Manual.
Panel color: white.
Power type: DC24V.
Middle end model of high performance and low price.
GT25 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen MITSUBISHI Gateway Functions Manual.
Connect GOT front USB interface and computer,
Can be through the FA, the GOT machine programming, start and adjust the operation,
Save the trouble of opening the control cabinet and changing the cable.
1, USB interface: device USB machine (Mini-B USB)
Can connect to the computer to transfer data MITSUBISHI Gateway Functions Manual.
2, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
3, the extension of the interface
Communication module and optional module can be installed GT1595-XTBD Gateway Functions Manual.
4, Ethernet interface
Up to 4 different manufacturers can be connected at the same time
FA machine.
5, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
6, RS-422/485 interfface
Can be connected to a variety of FA machines, bar code reader GT1595-XTBD Manual .
7, SD memory card slot
Can save alarm and log data, such as a large number of data.