For video input (NTSC/PAL) 4ch.
Applicable model: GT27. For the GT1595-XTB.
Applicable model: GT16. Bus cables used for GOT1000 to replace the ferrite cores used in the existing GOT-A900 bus cables GT1150-QLBDA PDF.
Applicable models: GT16, GT15, GT11. For video input (NTCS/PAL) 1 channel motion picture playback.
Applicable model: GT16. Cable length: 5.0m.
For QnA/ACPU/ motion controller CPU (A series, extended basis system) and the connection between A7GT-CNB GT1150-QLBDA
Applicable models: GT16, GT15, GT11. For QCPU (Q) / transport controller CPU (Q Series) the bus (1 channel) thin type unit.
Applicable models: GT15, GT16, GT27, GT25 GT1150-QLBDA PDF. 10.4 inches.
Surface treatment: anti reflective film.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25. Series introduction: set a number of basic functions in a small body model.
Screen size: 4.5 inches.
Display color: monochrome GT1150-QLBDA PDF.
Mounting type: panel mounting type.
Resolution: 288 * 96.
Display device: STN monochrome.
Host frame color: black.
Power type: DC5V.
GT10 backlight: white backlight.
Communication interface: with built-in RS-422.
Set a number of basic functions in a compact type.
GT1055/GT1050/GT1045/GT1040:
User storage capacity: 3MB MITSUBISHI MES Interface Function Manual .
Device USB port.
The standard RS-422/485 and RS-232 interface.
GT1030/GT1020:
User storage capacity: 1.5MB (gt1030) /512kb (gt1020).
Three color LED backlight design, equipment status at a glance.
The standard RS-422/485 or RS-232 interface.
Touch screen, also known as touch screen, touch panel, is a kind of induction type liquid crystal display device can receive contacts and other input signals,
When touching the screen button on the screen,
The tactile feedback system on the screen can drive various connecting devices according to the pre programmed program,
Can be used to replace the mechanical buttoon panel, and by the liquid crystal display screen to create the image of the effect of birth MITSUBISHI MES Interface Function Manual MITSUBISHI MES Interface Function Manual GT1150-QLBDA Manual . A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re caliibrated to the touch screen system GT1150-QLBDA MES Interface Function Manual .
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT1150-QLBDA Manual .