For the graphic operation terminal on the back of the extra CF port (B disk).
Applicable models: GT16, GT15. 12.1 inches.
Surface treatment: anti reflective film GT1030-LBDW2 PDF.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25. Length: 3 meters.
Connection between a connector adapter box and a smart GOT.
Applicable model: HandyGOT GT1030-LBDW2 Accessories for 8.4 inch models.
Applicable models: GT16, GT15. Cable length: 35m.
For long distance connections between QCPU and GOT (above 13.2M) (need A9GT-QCNB).
Long distance connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25 GT1030-LBDW2 PDF. 10.4 inches.
Surface treatment: anti reflective film.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25. Protective film for 4.7 inch screen.
Transparent, 5.
Applicable model: GT104 GT1030-LBDW2 PDF. Cable length: 10 meters.
QnACPU GOT.
RS-422 conversion (FA-CNV / CBL) cable GOT.
The serial communication module GOT.
The peripheral machine connection module (AJ65BT-G4-S3) GOT.
[D-sub 25 pin loose line (row 5 pin interface terminal)].
GT2103-PMBD does not support Q00JCPU, Q00CPU, CPU Q01CPU direct connection MITSUBISHI Instructions Manual.
Applicable model: GT21. Protective film for 15 inch screen.
Scrub (frame: white), 5.
Applicable model: GT15. For video input (NTCS/PAL) 4 channel / RGB input 1 channel composite input.
Applicable model: GT15. Functtion: high performance and low price in the middle end model GT1030-LBDW2 Manual .
Picture size: 10 MITSUBISHI Instructions Manual. 4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: white.
Power type: AC100~240V.
Middle end model of high performance and low price.
GT25 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen MITSUBISHI Instructions Manual.
Connect GOT front USB interface and computer,
Can be through the FA, the GOT machine programming, start and adjust the operation,
Save the trouble of opening the control cabinet and changing the cable.
1, USB interface: device USB machine (Mini-B USB)
Can connect to the computer to transfer data.
2, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
3, the extension of the interface
Communication module and optional module ccan be installed GT1030-LBDW2 Instructions Manual.
4, Ethernet interface
Up to 4 different manufacturers can be connected at the same time
FA machine.
5, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
6, RS-422/485 interfface
Can be connected to a variety of FA machines, bar code reader GT1030-LBDW2 Manual .
7, SD memory card slot
Can save alarm and log data, such as a large number of data.