Function extension board for RS-485 communication.
No DC24V consumption, no occupancy of the input output (FX1S and FX1N of the host computer). MITSUBISHI inverter FR-A740 series FX3U-80MR/ES-A PDF.
Voltage level: 3 phase 400V.
Frequency converter capacity: 3.7KW.
FR-A700 converter products are suitable for all kinds of high load requirements of the equipment.
Such as lifting, lift, printing and dyeing, printing and dyeing, material coiling and other general occasions FX3U-80MR/ES-A
High level driving performance.
Unique sensorless vector control mode,
A wide variety of mechanical equipment can be operated at high precision in the super low speed region without the need of the encoder FX3U-80MR/ES-A PDF.
With torque control mode,
And in the speed control mode can use the torque limit function.
With vector control function (with encoder),
Frequency converter can achieve position control and fast response, high precision speed control (zero speed control, servo lock, etc FX3U-80MR/ES-A PDF. ) and torque control. Cable length: 2m.
RS-485 terminal unit conversion unit.
Applicable model: GT16. Power: 22kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity MITSUBISHI USER'S MANUAL FX3U-80MR/ES-A Manual.
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor.)
According to the motor power used to select the DC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose MITSUBISHI USER'S MANUAL. ) Input output cable for A6TBXY36 type connector / terminal row conversion module.
Length 1.5M. Purpose: to operate, monitor, and change the parameters through the network.
Applicable frequency converter: FR-A700, FR-F700, FR-E700 MITSUBISHI USER'S MANUAL. MITSUBISHI inverter series: FR-F842.
Voltage level: three phase 400V.
Power: 560kw.
SLD converter rated current: 1212A.
Structure and function: the rectification part is off type.
Type: CA.
Substrate coating: have.
Energy saving by high efficiency motor.
Reduce standby power consumption.
DC24V external power supply, the input MC signal can be stopped after the motor for the OFF, in the motor drive for the ON.
Standby power management can be carried out by means of frequency converter to realize the power consumptiion reduction of standby time FX3U-80MR/ES-A USER'S MANUAL.
According to the temperature of the inverter cooling fan, the operation of the inverter can be controlled.
According to the operating conditions of the inverter cooling fan output the correspondinng signal,
Therefore, the inverter and other built-in fan and inverter cooling fan synchronous operation FX3U-80MR/ES-A Manual.
Can reduce the power consumption in the stop.