MITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 11KW.
When the inverter is running, the starting current and starting torque of the motor are how?
With the operation of the inverter, with the acceleration of the motor to improve the frequency and voltage,
The starting current is limited to 150% below the rated current (according to the different types of aircraft, 125%~200%) FX3G-1DA-BD PDF FX3G-1DA-BD
Starting with power frequency power supply, the starting current is 6~7 times of the rated current, therefore, the impact on the mechanical and electrical.
The inverter drive can be smoothly start (start time longer) FX3G-1DA-BD PDF.
The starting current is 1.2~1.5 times of the rated current, and the starting torque is 70%~120% rated torque;
For the inverter with the torque automatic enhancement function, the starting torque is more than 100%, which can start with full load. Output expansion board (transistor output 2 points) FX3G-1DA-BD PDF. Can use the encoder to perform vector control.
Combined use of the position detector (PLG) with the position of the main shaft of the working machine,
Can be carried out on the position of the spindle stop (directional) control.
The speed is kept constant through feedback motor rotation speed MITSUBISHI USER'S MANUAL. Connecting cable for handheld GOT and PLC.
Cable length: 1.5 meters. FX3G-1DA-BD Manual.
Application: RS-232C connection (Q series (except for QnU). Can be isolated to obtain DC24/48/100V, AC100/200V input signal.Protocol: SLMP, TCP/IP, UDP, SNTP.
Communication mode: full duplex / half duplex MITSUBISHI USER'S MANUAL.
At the same time can open a few: 4 connection.
Weight: 0.3kg.
Can be low cost will be connected to the FX3 series Ethernet.
Support data monitoring, can monitor the basic unit through the computer browser,
Remote maintenance can be carried out by Works2 GX in a place far from the scene MITSUBISHI USER'S MANUAL.
Connect FX3SA, FX3S, FX3GA, FX3G, FX3U host, you need to convert the adapter or function expansion board. MITSUBISHI inverter series: FR-A800.
Voltage level: three phase 400V.
Power: 220kw.
SLD converter rated current: 547A.
Structure and function: Standard model.
Type: CA.
Substrate coating: have.
Mirror like ultra fine processing.
In order to adapt to the new material diversification, the machine adopts the most cutting-edge technology, more than ever more slim hard.
In order to be able to realize the fine cutting, grinding on the hard and hard material,
The need foor high-speed operation has become more and more strong FX3G-1DA-BD USER'S MANUAL.
In order to cope with the increasing demand of logistics, every port in the world has a crane in every day.
A container filled with cargo.
We can achieve a new type of inverrter products under the conditions of low speed and high torque to achieve smooth cargo handling operations,
Carry on the smooth movement to the heavy FX3G-1DA-BD Manual.