8 channel analog input module.
This is a high density of 8 channel A/D components,
Can receive voltage and current input, with the installation of the inside of the cover plate switch,
The input type and range of each channel can be set up according to the application requirements:
12 bit resolution,
Automatic drift correction function,
0 A956GOT-TBD-M3 PDF. 5msec/1 channel,
-10-0-10V or 0-20mA input A956GOT-TBD-M3 RS-232 2 channel.
Transfer speed: 0.3-19.2kbps.
Equipment layer / field bus CC-Link device layer is the PLC and other control devices and sensors and drive devices connected to the field network,
Network for the lowest layer of the whole network system A956GOT-TBD-M3 PDF.
Using CC-Link field bus connection, the number oof wiring is greatly reduced,
Improve the maintainability of the system A956GOT-TBD-M3 Manual.
And, not just the amount of data ON/OFF and other switches,
Can also be connected to the ID system, bar code reader, inverter, man-machine interface and other intelligent devices,
From the completion of a variety of data communication, the management of the terminal production information can be realized,
On the centralized management of the state of the machine movement,
Make maintenance work efficiency also greatly improved A956GOT-TBD-M3 PDF MITSUBISHI Operating Manual.
Q series PLC in the use of CC-Link function better,
And easier to use. Points: 32 points
.
Rated voltage: DC24V.
Connection type: connector
.
Three remote components can be connected to the CC-LINK system.
Remote I/O: refers to those who require only the ON/OFF control function of the field components, such as digital I/O or pneumatic valve, etc MITSUBISHI Operating Manual. .
In this type of communication can only be carried out in the bit data.
Remote components: refers to those that require processing of the register data of the field components, such as analog I//O and counters, etc A956GOT-TBD-M3 Operating Manual. .
In this type of component, in addition to the bit data can be carried out in the register data communication MITSUBISHI Operating Manual.
Intelligent remote: this type of component is to allow the main sstation or other stations to access the action, to collect data and control the local PLC station,
GOTS and programmer interface unit are of this type A956GOT-TBD-M3 Manual.